塑料干燥機選擇注意事項
以下是干燥裝置選型的一般原則，很難說哪一項或哪幾項是*重要的，理想的選型必須根據自己的條件有所側重，有時折中是必要的。 
   塑料干燥機選擇注意事項1.不完全依賴過去的經驗，注重吸收新技術，多聽專家的意見。
  塑料干燥機選擇注意事項 2.選型前*好能做出物料的干燥實驗，深入了解類似物料已經使用的干燥裝置（優缺點），往往對恰當選型有幫助。 
  塑料干燥機選擇注意事項 3.符合環保要求，工作條件好，**性高。  
   塑料干燥機選擇注意事項4.優先選擇結構簡單、備品備件供應充足、可靠性高、壽命長的干燥裝置。     
   5.運行成本低---設備折舊、耗能、人工費、維修費，備件費...等運行費用要盡量低廉。 
   6.耗能低-------不同干燥方法耗能指標不同，一般傳導式干燥的熱效率理論上可達100%，對流式干燥只能70%左右。
   7.節省投資-----完成同樣功能的干燥裝置，有時其造價相差懸殊，應擇其低者選用。     
   8.干燥速率高---僅就干燥速率看，對流干燥時物料高度分散在熱空氣中，臨界含水率低，干燥速度快，而且同是對流干燥，干燥方法不同臨界含水率也不同，因而干燥速率也不同。 

   9.適用性-------干燥機首先必須能適用于特定物料，且滿足物料干燥的基本使用要求，包括能很好的處理物料（給進、輸送、流態化、分散、傳熱、排出等），并能滿足處理量、脫水量、產品質量等方面的基本要求。 

Plastic dryer selection considerations
The following is the general principle of drying equipment selection, it is difficult to say which one or which is the most important, the ideal selection must be based on their own conditions have focused, sometimes a compromise is necessary.
   Plastic dryer selection considerations 1. not entirely dependent on past experience, pay attention to absorb new technology, listen to the views of experts.
  Plastic Dryer Selection Notes 2. Before selection, it is advisable to make drying experiments of materials, and to understand the drying equipment (advantages and disadvantages) already used in similar materials, often help with proper selection.
  Plastic dryer selection considerations 3. Meet the environmental requirements, working conditions, and high security.
   Plastic Dryer Selection Considerations 4. Preferred Drying devices with simple structure, spare parts supply, high reliability, long life.
   5. Low operating costs --- equipment depreciation, energy consumption, labor costs, maintenance costs, spare parts costs ... and other operating costs should be as low as possible.
   6. Low energy consumption ------- different drying methods of different energy consumption indicators, the general conduction of thermal efficiency of dry up to 100%, convection drying can only about 70%.
   7. Save investment ----- to complete the same function of the drying device, and sometimes the cost difference between the poor, should choose the lower selection.
   8. Drying rate is high - only the drying rate, the convection drying material is highly dispersed in the hot air, the critical moisture content is low, the drying speed is fast, and the same is the convective drying, drying method different critical moisture content is different The drying rate is also different.
   9. Applicability ------- dryer must first be able to apply to specific materials, and to meet the basic requirements of the use of dry materials, including good processing materials (feeding, transport, fluidization, dispersion, transmission Heat, discharge, etc.), and to meet the processing capacity, dehydration, product quality and other aspects of the basic requirements.