Slow machine edge recovery crusher
Mature material recovery management program
Specially designed for crushing waste and gates produced during recycling of plastic.
▲ need to break the material through the feed hopper feed, according to the different broken materials, a variety of feeding hopper to choose from.
▲ According to the different use, low-speed online crusher series in the optional installed on the way there are a variety of options, can be equipped with a feeding fan with recycling system, the immediate recovery method can also choose with a suction slot and bagging interface The use of a variety of ways to make the production of low-speed crusher series has a very wide range of uses for customers to solve different online crushing program.
The low-speed crusher combines the common advantages of the general low-speed crusher, such as low noise and less dust, and more excellent performance in its design, such as knives, rotors, and cranes specially designed for crushing waste and gates Disassemble the way, reflects the humidification of low-speed crusher. The machine uses the reducer drive mode, increases the torque, the machine may start at any time, even if there is broken material in the crushing chamber, you can also easily start the machine.
                 
Slow machine edge recovery crusher perfect structural design
Split open body, easy to clean up the crushing chamber.
Chip - type die - cutting structure, distributed cutting load.
Free to adjust the knife design, replacement maintenance is more simple.
Ultra-quiet, fully enclosed double-layer sound insulation body design, effectively improve the workshop noise interference.
Low speed, high torque, less dust, stainless steel hopper easy to clean, durable, easy to operate and so on.
High strength, long life tool, more suitable for crushing the material containing fiber material.
            
Slow machine edge recovery crusher application range
Machine edge crusher used in manual or mechanical hand to the material crushed, with the plastic molding machine edge to take the machine to do the mouth of the shredded and waste recycling immediately, or with the belt conveyor will machine edge water
   Ingredients are crushed.
   Slow machine edge recovery crusher          
Slow machine edge recycling crusher safe electrical configuration
With open, stop, emergency stop button and main power control switch, motor overload protection, feed bin recycling compartment with safety protection switch.
Slow machine edge recovery crusher working principle diagram:
   Low speed machine edge recovery crusher can also choose other functions
Cyclone dust collector: effective separation of crushing and dust, easy to use the effective use of raw materials.
Dust collection bag: easy to clean up and reduce pollution.
Feeding fan device: can achieve automatic feeding, improve the efficiency.
Full alarm device: When the silo crushed to set the full material position, the machine automatically stops working and alarm to inform the user.
Specialized screen aperture: Φ4, Φ8, Φ10, Φ12, the user can be selected according to actual needs.
New material ratio valve: According to the production needs to adjust the mixing ratio of the new material.
Magnet adsorption: can effectively prevent the inlet from entering the crushing chamber inside a variety of iron debris, to prevent metal damage to the machine.Slow machine edge recovery crusher

粉碎機技術參數(shù)表

型號	口徑mm	工作能力kg/hr	電機工率	外形尺寸mm	凈重kg	軸心轉速
230A	230×165	8-10	1HP(0.75KW)	600×410×880	130	27-35r.p.m
230B				720×350×910	120
250A	255×230	10-15	2HP(1.5KW)	615×580×980	192	27-35r.p.m
250B				820×450×980	163
260A	261×260	10-20	3HP(2.2KW)	640×620×1030	202	27-35r.p.m
260B				850×450×1030	197
350A	354×260	15-30	3HP(2.2KW)	710×610×1060	244	27-35r.p.m
350B				1000×530×1060	235
350C	354×260	15-30	5HP(3.7KW)	710×630×1180	300	27-35r.p.m
350D				930×500×1180	287
450A	450×260	15-30	5HP(3.7KW)	710×720×1180	330	27-35r.p.m
450B				930×600×1180	320
570	570×435	20-30	5HP(3.7KW)	1290×675×1661	730	27-35r.p.m

machine.Low speed machine recycling crusher