粉末集中供料系統原理計量準確、混合均勻，并可靈活改變顏色，適應對產品的多顏色多品種要求。根據不同成型機的生產量，靈活變更供料量。多個供料管道設計，可保證對主料多樣化的要求，從而可以保持潔凈的生產車間，

而粉末集中供料系統原理獨特集中粉塵回收系統，清理更便捷，保證整個系統運行穩定，絕無塑膠回潮、堵料現象發生，在避免原料回潮的同時也保證加入化工混合設備或者注塑機中原料一致性，在真空負壓同進作用下，原料中原有的粉塵經過過濾器系統濾出，有利提高產品質量。

粉末集中供料系統原理控制部件與執行部件之間的另一種聯系就是反饋信息，執行部件通過反饋線向控制部件反映操作情況，

以便使得控制部件根據執行部件的狀態來下達新的微命令，微操作在執行部件中是組基本的操作。

粉末集中供料系統原理控制部件與執行部件的一種聯系就是通過控制線。控制部件通過控制線向執行部件發出各種控制命令，

通常這種控制命令叫做微命令，而執行部件接受微命令后所執行的操作就叫做微操作。 Powder centralized feeding system principle accurate measurement, mixed evenly, and flexible to change the color, to adapt to the multi-color products and more requirements. According to the production of different molding machine, the flexibility to change the amount of feed. A number of feed pipe design, can guarantee the requirements of the diversification of the main material, which can maintain a clean production workshop, and powder centralized feeding system principle unique concentration of dust recovery system, clean more convenient to ensure the stability of the entire system, no Plastic resurgence, blocking material phenomenon occurs, in order to avoid the return of raw materials at the same time also ensure that the injection molding machine in the consistency of raw materials, in the vacuum negative pressure with the role of raw materials in the original dust filter system filter out, favorable to improve product quality.


Principle of Powder Concentrated Feeding System

The other connection between the control unit and the actuator is the feedback information, and the execution unit reflects the operation by the feedback line to the control unit so that the control unit causes the control unit to issue a new micro command according to the state of the execution unit, Micro-operation is the basic operation of the group in the execution part.

Powder Concentration Feed System Principle One of the links between the control part and the actuator is through the control line. The control unit issues various control commands to the execution unit via the control line. Normally this control command is called a micro command, and the operation performed by the execution unit after accepting the micro command is called a micro operation.